Register | Log In
 
Components > Enclosures > 
Your Cart is Empty
View Cart
 
 
Enclosures
Enclosure plastic black 2.76x2x1inch
tn_mb025.jpg
 (Out of Stock)This range of boxes can be used as enclosures for electronic circuits. A range of plastic boxes, molded in hi-impact styrene. Dimensions indicated at each enclosure are the outer dimensions. Lid and screws to fix lid are supplied. Lid is lipped to ensure good fit. The insides of the boxes are smooth (not ribbed). (MB025)
Read More
  Component or Part  
  MB025  
  0  
Quantity:  

Enclosure plastic white 2.76x2x1inch
tn_mb027.jpg
This range of boxes can be used as enclosures for electronic circuits. A range of plastic boxes, molded in hi-impact styrene. Dimensions indicated at each enclosure are the outer dimensions.
Lid and screws to fix lid are supplied. Lid is lipped to ensure good fit. The insides of the boxes are smooth (not ribbed).(MB027)
Read More
  Component or Part  
  MB027  
  15  
Quantity:  

Enclosure plastic black 2.4x1.4x0.7inch
tn_mb034.jpg
This range of boxes can be used as enclosures for electronic circuits. A range of plastic boxes, molded in hi-impact styrene. Dimensions indicated at each enclosure are the outer dimensions.
These boxes have a clip to close lid. The insides of the boxes are smooth. (MB034)
Read More
  Component or Part  
  MB034  
  8  
Quantity:  

Enclosure plastic white 2.4x1.4x0.7inch
tn_mb033.jpg
This range of boxes can be used as enclosures for electronic circuits. A range of plastic boxes, molded in hi-impact styrene. Dimensions indicated at each enclosure are the outer dimensions.
These boxes have a clip to close lid. The insides of the boxes are smooth. (MB033)
Read More
  Component or Part  
  MB033  
  9  
Quantity:  

Enclosure plastic rib black 3.3x2.2x1.2i
tn_mb028.jpg
 (Out of Stock)This range of boxes can be used as enclosures for electronic circuits. A range of plastic boxes, molded in hi-impact styrene. Dimensions indicated at each enclosure are the outer dimensions.
Lid and screws to fix lid is supplied. The lid is lipped to ensure a good fit. The insides of all the boxes have slotted walls (ribs) to accept PCBs, etc. (MB028)
Read More
  Component or Part  
  MB028  
  0  
Quantity:  

Enclosure plastic white rib 3.4x2.2x1.2i
tn_mb029.jpg
This range of boxes can be used as enclosures for electronic circuits. A range of plastic boxes, molded in hi-impact styrene. Dimensions indicated at each enclosure are the outer dimensions.Lid and screws to fix lid is supplied. The lid is lipped to ensure a good fit. The insides of all the boxes have slotted walls (ribs) to accept PCBs, etc. (MB029)
Read More
  Component or Part  
  MB029  
  69  
Quantity:  

Enclosure plastic black rib 5.1x2.8x1.7i
tn_pb125.jpg
This range of boxes can be used as enclosures for electronic circuits. A range of plastic boxes, molded in hi-impact styrene. Dimensions indicated at each enclosure are the outer dimensions. Lid and screws to fix lid is supplied. The lid is lipped to ensure a good fit. The insides of all the boxes have slotted walls (ribs) to accept PCBs, etc. (PB125)
Read More
  Component or Part  
  PB125  
  5  
Quantity:  

Enclosure plastic white non-r5.1x2.8x1.7
tn_pb199.jpg
This range of boxes can be used as enclosures for electronic circuits. A range of plastic boxes, molded in hi-impact styrene. Dimensions indicated at each enclosure are the outer dimensions. Lid and screws to fix lid are supplied. Lid is lipped to ensure good fit. The insides of the boxes are smooth (not ribbed). (PB199)
Read More
  Component or Part  
  PB199  
  5  
Quantity:  

Enclosure plastic white rib 5.1x2.8x1.7i
tn_g-mb025__9.jpg
This range of boxes can be used as enclosures for electronic circuits. A range of plastic boxes, molded in hi-impact styrene. Dimensions indicated at each enclosure are the outer dimensions.Lid and screws to fix lid is supplied. The lid is lipped to ensure a good fit. The insides of all the boxes have slotted walls (ribs) to accept PCBs, etc. (PB124)
Read More
  Component or Part  
  PB124  
  5  
Quantity:  

Enclosure plastic black non-ribbed 4.1x4.1x2inch
tn_rb014.jpg
This range of boxes can be used as enclosures for electronic circuits. A range of plastic boxes, molded in hi-impact styrene. Dimensions indicated at each enclosure are the outer dimensions.
Lid and screws to fix lid are supplied. Lid is lipped to ensure good fit. The insides of the boxes are smooth (not ribbed).
Read More
  Component or Part  
  RB014  
  7  
Quantity:  

Enclosure plastic rib black 4.1x4.1x2inc
tn_g-mb025__11.jpg
This range of boxes can be used as enclosures for electronic circuits. A range of plastic boxes, molded in hi-impact styrene. Dimensions indicated at each enclosure are the outer dimensions.
Lid and screws to fix lid is supplied. The lid is lipped to ensure a good fit. The insides of all the boxes have slotted walls (ribs) to accept PCBs, etc. (SB026)
Read More
  Component or Part  
  SB026  
  6  
Quantity:  

Enclosure plastic white non-ribbed 4.1x4.1x2i
tn_rb013.jpg
This range of boxes can be used as enclosures for electronic circuits. A range of plastic boxes, molded in hi-impact styrene. Dimensions indicated at each enclosure are the outer dimensions.Lid and screws to fix lid are supplied. Lid is lipped to ensure good fit. The insides of the boxes are smooth (not ribbed). (RB013)
Read More
  Component or Part  
  RB013  
  11  
Quantity:  

Enclosure plastic rib white 4.1x4.1x2inc
tn_g-mb025__13.jpg
This range of boxes can be used as enclosures for electronic circuits. A range of plastic boxes, molded in hi-impact styrene. Dimensions indicated at each enclosure are the outer dimensions.
Lid and screws to fix lid is supplied. The lid is lipped to ensure a good fit. The insides of all the boxes have slotted walls (ribs) to accept PCBs, etc.
(SB025)
Read More
  Component or Part  
  SB025  
  14  
Quantity:  

Enclosure plastic black non-ribbed 5.9 x 3.5 x 2 inch
Click here for detailed specs.
Lid and screws to fix lid are supplied. Lid is lipped to ensure good fit. The insides of the boxes are smooth (not ribbed). This range of boxes can be used as enclosures for electronic circuits. A range of plastic boxes, molded in hi-impact styrene. Dimensions indicated at each enclosure are the outer dimensions. (SB039)
Read More
  Component or Part  
  SB039  
  63  
Quantity:  

Enclosure plastic black ribbed 5.9x3.5x2 inch
tn_g-mb025__15.jpg
This range of boxes can be used as enclosures for electronic circuits. A range of plastic boxes, molded in hi-impact styrene. Dimensions indicated at each enclosure are the outer dimensions. Lid and screws to fix lid is supplied. The lid is lipped to ensure a good fit. The insides of all the boxes have slotted walls (ribs) to accept PCBs, etc. (SB028)
Read More
  Component or Part  
  SB028  
  7  
Quantity:  

Enclosure plastic white rib 5.9x3.5x2inc
tn_g-mb025__17.jpg
PLASTIC ENCLOSURES CLIP TO CLOSE
This range of boxes can be used as enclosures for electronic circuits. A range of plastic boxes, molded in hi-impact styrene. Dimensions indicated at each enclosure are the outer dimensions. Lid and screws to fix lid is supplied. The lid is lipped to ensure a good fit. The insides of all the boxes have slotted walls (ribs) to accept PCBs, etc.
(SB027)
Read More
  Component or Part  
  SB027  
  5  
Quantity:  

Enclosure plastic black rib 7.7x4.4x2.4i
tn_g-mb025__18.jpg
This range of boxes can be used as enclosures for electronic circuits. A range of plastic boxes, molded in hi-impact styrene. Dimensions indicated at each enclosure are the outer dimensions. Lid and screws to fix lid is supplied. The lid is lipped to ensure a good fit. The insides of all the boxes have slotted walls (ribs) to accept PCBs, etc. (SB030)
Read More
  Component or Part  
  SB030  
  21  
Quantity:  

Enclosure plastic white non-r7.7x4.4x2.4
tn_sb037.jpg
This range of boxes can be used as enclosures for electronic circuits. A range of plastic boxes, molded in hi-impact styrene. Dimensions indicated at each enclosure are the outer dimensions. Lid and screws to fix lid are supplied. Lid is lipped to ensure good fit. The insides of the boxes are smooth (not ribbed).
(SB037)
Read More
  Component or Part  
  SB037  
  14  
Quantity:  

Enclosure plastic white rib 7.7 x 4.4 x 2.4 inch
tn_sb029.jpg
This range of boxes can be used as enclosures for electronic circuits. A range of plastic boxes, molded in hi-impact styrene. Dimensions indicated at each enclosure are the outer dimensions.
Lid and screws to fix lid is supplied. The lid is lipped to ensure a good fit. The insides of all the boxes have slotted walls (ribs) to accept PCBs, etc. (SB029)
Read More
  Component or Part  
  SB029  
  5  
Quantity:  

Enclosure plastic black 195x112x62mm
tn_sb042.png
 (Out of Stock)SB042
Read More
  Component or Part  
  SB042  
  0  
Quantity:  

SEALED ABS ENCLOSURE - DARK GRAY 6.7" x 4.8" x 2.2"
tn_g300.jpg
Specifications:

material: ABS
dimensions: 6.7" x 4.8" x 2.2"
color: dark gray
(VG313)
Read More
  Component or Part  
  VG313  
  5  
Quantity:  

Gray ABS Project Box 5.3" x 3.0" x 2.0"
tn_vg1098.jpg
Description: This plastic utility box is more than good value and is available in 2 sizes.
It is molded in impact-resistant ABS and has card guides spaced at intervals of 0.79" to allow flexibility in the spacing of the components or the creation of compartments. The guides will accept cards with a max. thickness of 0.06".

Specifications:
  • Material: ABS
  • Dimensions: 5.4" x 3.0" x 2.0"
  • Color: gray
Read More
  Assembled and Tested  
  VG1098  
  15  
Quantity:  

PLASTIC ABS BOX - BLACK 130 x 70 x 45mm
tn_wcah2853.jpg
Specifications
dimensions: 5.1" x 2.8" x 1.8" 
color: black
Vertical grooves on the inside to affix PCB's 
Read More
  Assembled and Tested  
  WCAH2853  
  10  
Quantity:  

PLASTIC ABS BOX - BLACK 85 x 55 x 30mm
tn_wcah2855.jpg
Specifications
Dimensions: 85 x 55 x 30mm  (3.35" x 2.17" x 1.18")
Color: black
Vertical grooves on the inside to affix PCB's
Read More
  Component or Part  
  WCAH2855  
  3  
Quantity:  

Plastic Box - Black 160 x 95 x 55mm
tn_wcah2851.jpg
Specifications:
  • Dimensions: 6.3" x 3.7" x 2.2"
  • Color: black 
  • Vertical grooves on the inside to affix PCB's
Read More
  Assembled and Tested  
  WCAH2851  
  34  
Quantity:  

SEALED ABS ENCLOSURE - DARK GRAY 4.5" x 2.6" x 1.6"
tn_g300.jpg
Specifications:
  • Material: ABS
  • Dimensions: 4.6" x 2.6" x 1.6"
  • Color: dark gray
Read More
  Component or Part  
  VG304  
  14  
Quantity:  

PLASTIC HOUSING FOR K5600G OR K5600R (VB5600)
tn_b5600.jpg
Please Note: This is only the enclosure and does not include the kit that goes inside.

Specifications:

for: LED display with green LEDs K5600G or red LEDs K5600R
dimensions: 19.0" x 3.4" x 1.0"
(VB5600)
Read More
  Component or Part  
  VB5600  
  1  
Quantity:  

Sealed ABS Enclosure - Dark Gray 4.5" x 2.6" x 2.2"
tn_g300.jpg
Description: These enclosures consist of high-impact ABS (operating temperature : -4°F to +212°F).
The lid and the base equipped with a tongue and groove sealing system with a neoprene gasket. The mounting holes and the lid-fixing screws are outside the sealed, which prevents moisture and dust from entering the enclosure. Internal guide slots allow the vertical mounting of PCB assemblies.
Designed to meet IP65 of IEC529 and NAMA4 (dust- and hoseproof).
The bosses on the internal base allow the horizontal fixing of PCBs or the connection of terminals, etc. with threaded brass inserts.
 

Specifications:
  • Material: ABS
  • Dimensions: 4.5" x 2.6" x 2.2"
  • Color: dark gray
Read More
  Component or Part  
  VG308  
  18  
Quantity:  

Sealed ABS Enclosure - Dark Gray 8.7" x 5.7" x 2.2"
tn_g300.jpg
Description: These enclosures consist of high-impact ABS (operating temperature : -4°F to +212°F).
The lid and the base equipped with a tongue and groove sealing system with a neoprene gasket. The mounting holes and the lid-fixing screws are outside the sealed, which prevents moisture and dust from entering the enclosure. Internal guide slots allow the vertical mounting of PCB assemblies.
Designed to meet IP65 of IEC529 and NAMA4 (dust- and hoseproof).
The bosses on the internal base allow the horizontal fixing of PCBs or the connection of terminals, etc. with threaded brass inserts.

Specifications:
  • Material: ABS
  • Dimensions: 8.7" x 5.7" x 2.2"
  • Color: dark gray
Read More
  Component or Part  
  VG317  
  13  
Quantity:  

SEALED ABS ENCLOSURE - DARK GRAY 7.7" x 3.1" x 2.2"
tn_g300.jpg
These enclosures consist of high-impact ABS (operating temperature : -4°F to +212°F).
The lid and the base equipped with a tongue and groove sealing system with a neoprene gasket. The mounting holes and the lid-fixing screws are outside the sealed, which prevents moisture and dust from entering the enclosure. Internal guide slots allow the vertical mounting of PCB assemblies.
Designed to meet IP65 of IEC529 and NAMA4 (dust- and hoseproof).
The bosses on the internal base allow the horizontal fixing of PCBs or the connection of terminals, etc. with threaded brass inserts.

Specifications
material: ABS
dimensions: 7.7" x 3.1" x 2.2"
color: dark gray
Read More
  Component or Part  
  VG346  
  5  
Quantity:  

SEALED ABS ENCLOSURE - DARK GRAY 2.5" x 2.3" x 1.4"
tn_g300.jpg
Specifications:
material: ABS
dimensions: 2.5" x 2.3" x 1.4"
color: dark gray
Read More
  Component or Part  
  VG302  
  2  
Quantity:  

WATERPROOF EQUIPMENT CASE - 9.25" X 7.36" X 3.74"
Click here for specs, downloads, and more pictures.
Features:
  • made with high-impact ABS plastic
  • can withstand operating temperatures between -40 degrees Fahrenheit to 208 degrees Fahrenheit
  • filled with pre-cut foam for easy to use compartments
  • has a knob with o-ring gasket for manual pressure adjustment
  • holes to fit padlocks

Dimensions:

  • 9.25" X 7.36" X 3.74"
Read More
  Assembled and Tested  
  EPC022  
  1  
Quantity:  

WATERPROOF EQUIPMENT CASE - 14.76" X 10.71" X 6.69"
Click here for specs, downloads, and more pictures.
Features:
  • made with high-impact ABS plastic
  • can withstand operating temperatures between -40 degrees Fahrenheit to 208 degrees Fahrenheit
  • filled with pre-cut foam for easy to use compartments
  • has a knob with o-ring gasket for manual pressure adjustment
  • holes to fit padlocks

Dimensions:

  • 14.76" X 10.71" X 6.69"
Read More
  Assembled and Tested  
  EPC012  
  1  
Quantity:  

WATERPROOF EQUIPMENT CASE - 18.30" X 14.37" X 5.51"
Click here for specs, downloads, and more pictures.
Features:
  • made with high-impact ABS plastic
  • can withstand operating temperatures between -40 degrees Fahrenheit to 208 degrees Fahrenheit
  • filled with pre-cut foam for easy to use compartments
  • has a knob with o-ring gasket for manual pressure adjustment
  • holes to fit padlocks
  • shoulder strap included

Dimensions:

  • 18.30" X 14.37" X 5.51"
Read More
  Assembled and Tested  
  EPC015  
  1  
Quantity: