Your Cart is Empty
View Cart
 
 
 
 
IC Sockets
 
IC Sockets
..........................
 
Audio Jack Connectors
 
Audio Jack Connectors
..........................
 
RCA Phono / XLR Connectors
 
RCA Phono / XLR Connectors
..........................
 
Adapters Audio Jack / XLR / RCA Phono
 
Adapters Audio Jack / XLR / RCA Phono
..........................
 
RJ12, RJ14 and RJ45 (Cat 5) Connectors
 
RJ12, RJ14 and RJ45 (Cat 5) Connectors
..........................
 
Banana Connectors 2mm / 4mm
 
Banana Connectors 2mm / 4mm
..........................
 
Power Connectors DC/AC
 
Power Connectors DC/AC
..........................
 
Power Connectors For Mains 115V & 230V
 
Power Connectors For Mains 115V & 230V
..........................
 
'D' Type And Computer Connectors
 
'D' Type And Computer Connectors
..........................
 
IDC Header Plugs and Sockets
 
IDC Header Plugs and Sockets
..........................
 
Single Row Header Plugs And Sockets
 
Single Row Header Plugs And Sockets
..........................
 
DIN Sockets And Plugs
 
DIN Sockets And Plugs
..........................
 
BNC Connectors
 
BNC Connectors
..........................
 
N / PL259 Type Connectors
 
N / PL259 Type Connectors
..........................
 
TV / Video / Radio CO-AX Connectors
 
TV / Video / Radio CO-AX Connectors
..........................
 
Optical Digital Connectors
 
Optical Digital Connectors
..........................
 
Terminal Connector Tags
 
Terminal Connector Tags
..........................
 
Terminal Blocks
 
Terminal Blocks
..........................
 
Alligator Clips
 
Alligator Clips
..........................
 
Wire Clips
 
Wire Clips
Connectors and Sockets
LilyPad Battery Connect
Click here for specs, downloads, and more pictures.
Description:The LilyPad Battery Connect simply gives you a connection point for a battery or anything else you might want to plug in to your LilyPad system. It consists of a single 2-pin JST connector on a small LilyPad board with positive and negative terminals.
LilyPad is a wearable e-textile technology developed by Leah Buechley and cooperatively designed by Leah and SparkFun. Each LilyPad was creatively designed to have large connecting pads to allow them to be sewn into clothing. Various input, output, power, and sensor boards are available. They're even washable!

LilyPad Battery Connect is a design concepted by Felicia Williams of Boulder, Colorado.
Read More
  Assembled and Tested  
  DEV10083  
  4  
Quantity:  

Infrared Sensor Jumper Wire - 3-Pin JST
Click here for more pictures.
Description: Three pin JST connector with red, black, and yellow colors. 5 inch wire outs. This cable comes fully assembled as shown and connects directly to many different Sharp sensors. Quick and easy, this cable will save you 15-20 minutes over making your own wiring harness.
Read More
  Assembled and Tested  
  SEN08733  
  23  
Quantity:  

WIRE TO WIRE CONNECTOR SET 6.2 mm / 0.24" 1 X 2 POLES.
Click here for specs, downloads, and more pictures.
Features:
  • for cables of 0.5 to 2.1 mm² / 14 to 20 AWG
  • ratings: 50 V / 10 A
  • can be crimped with: VTNCT

Specifications:

  • number of contacts: 1 x 2 poles
  • contact resistance: 10 mohm max.
  • insulator resistance: 1000 Mohm min.
  • dielectric strength: 1500 VAC for 1 minute
  • current rating: 8-13 A
  • voltage rating: 300 VAC
  • pitch: 6.2 mm / 0.24"
  • material:
    • housing: Nylon UL 94V-0
    • contact: phosphor bronze (tin-plated)
Read More
  Component or Part  
  WTWCS1X2  
  1  
Quantity: