Components > Audio > 
Your Cart is Empty
View Cart
 
 
Audio
Electret Microphone 10mm Diameter 3Pin
Click here for more pictures!
FEATURES:
Omnidirectional type
High sensivity, flat frequency response
Shock resistant
SPECIFICATIONS:
Standard voltage: 4.5V
Current consumption: 0.5mA
Max input sound pressure: 120dB
Impedance: Low
Size: 10mm
Read More
  Component or Part  
  HB273  
  100  
Quantity:  

Buzzer 6V DC 400Hz (not piezo)
tn_jb035.jpg
JB035
Read More
  Component or Part  
  JB035  
  44  
Quantity:  

Buzzer PCB Mount 4 - 15VDC / 15mA
tn_jb036.jpg
JB036
Read More
  Component or Part  
  JB036  
  4  
Quantity:  

Buzzer Piezo PCB mount (external driver)
tn_jb037.jpg
JB037
Read More
  Component or Part  
  JB037  
  6  
Quantity:  

Speaker Round 3 inch 8 ohm 1 watt
Click here for detailed specs.
Specifications:
  • Diameter: 76mm (3 inch)
  • 1 Watt
  • 8 Ohm
Read More
  Component or Part  
  PB244  
  135  
Quantity:  

Electronic Siren 6-12V DC / 1300mA 125dB with Leads
Click here for detailed specs.
Specifications:
  • ABS
  • Wired siren
  • Operating voltage: 6-12Vdc
  • Current consumption (at 12Vdc with siren): 1300mA
  • Osc. frequency: 0.9-4kHz
  • Sound pressure level (at 1m): 125dBA
  • Dimensions: 3.9" x 4.3"(Ø)
  • Weight: 13oz
  • Mounting holes: 2.0" x 1.9"
  • Working temperature: -30 ~ +85 °C
  • IP-rating: IP5
  • Working time: at least 6 hours @ 12Vdc
Read More
  Assembled and Tested  
  SV/PS5  
  3  
Quantity:  

40mm (1.6in) Metal Housing Mylar Speaker 0.25W
Click here for specs, downloads and more pictures.
Specifications:
  • 0.25W
  • 40mm (1.57in)
  • 16 Ohm
Read More
  Component or Part  
  PB240  
  219  
Quantity:  

PANEL-MOUNTING BUZZER 4-28V DC / 8mA PCB TYPE
tn_sv5.jpg
Features:

  • panel-mounting type with screw connectors
  • continuous or pulse mode
  • high sound pressure level
  • operating power: 4-28V DC / 8mA

  • Specifications
    :

  • tone type: single / pulse
  • operating voltage: 3 - 28V DC
  • rated voltage: 12V DC
  • current consumption: 8mA
  • osc. frequency: 3.5kHz
  • sound level: 90dB
  • connector type: screw
  • body color: gray
  • weight: 0.77oz
  • Read More
      Component or Part  
      SV5  
      5  
    Quantity:  

    MICRO BUZZER 5V DC / 20mA PCB TYPE - SEALED
    tn_sv4_5-sn.jpg
    Features
    • sealed: yes
    • operating power: 4.5-5.5Vdc / 50mA
    • extremely compact, ultrathin construction
    • no electrical noise
    • low current consumption yet high sound pressure level
    Specifications
    • tone type: single
    • operating voltage: 4.5-5.5Vdc
    • rated voltage: 5V DC
    • current consumption: 50mA
    • osc. frequency: 2.3kHz±0.4
    • sound level: 85dB
    • connector type: pcb
    • body color: black
    • weight: 0.056oz
    Read More
      Component or Part  
      SV4/5-SN  
      4  
    Quantity:  

    LilyPad Buzzer
    Click here for specs, downloads, and more pictures.
    Description: This is a small buzzer for the LilyPad system. Use 2 I/O pins on the LilyPad main board and create different noises based on the different frequency of I/O toggling. Loud enough to hear inside a pocket but not obtrusively loud.
    Please note: This is an inductive buzzer meaning that is will act as a short to ground if you are not actively driving it. We recommend you put both I/O pins to low (0V) when the buzzer is not used.

    LilyPad is a wearable e-textile technology developed by Leah Buechley and cooperatively designed by Leah and SparkFun. Each LilyPad was creatively designed to have large connecting pads to allow them to be sewn into clothing. Various input, output, power, and sensor boards are available. They're even washable!

    Dimensions:
    • 20mm outer diameter
    • Thin 0.8mm PCB
    Read More
      Assembled and Tested  
      DEV08463  
      5  
    Quantity:  

    BOSS BRS35 3-1/2" Dual Cone Replacement Speaker
    Click here for specs, downloads, and more pictures!
    Features:
    • 3.5" dual polypropylene cone replacement speaker.
    • Read More...
    Read More
      Component or Part  
      BRS35  
      1  
    Quantity:  

    5" Indoor/Outdoor Horn
    Click here for specs, downloads, and more pictures!
    Features:
    • 5" Indoor/Outdoor Horn
    • This indoor outdoor horn speaker is made of high impact white ABS plastic.
    • Completely weatherproof outdoor horn speaker, ideal for indoor or outdoor use.
    • Great for small system paging speaker application.
    • Read More...
    Read More
      Component or Part  
      M-50H  
      7  
    Quantity:  

    2" Paper Cone Midrange Tweeter 4 Ohm
    Click here for specs, downloads, and more pictures!
    Features:
    • The SAS Bazooka 5" shielded midbass driver features a stamped steel frame, inverted concave diaphragm, foam half roll surround, and flat spider.
    • It boasts high power handling and smooth response, thanks to an optimized ceramic ferrite magnet and copper 4-layer voice coil on an aluminum former.
    • The WF5R-MM's 2 ohm rating makes it great for mobile sound applications; also for home use when used in multiples to achieve higher system impedances.
    • Made in Brazil by Bravox. Buyout, limited quantities.
    • Read More...

    Read More
      Component or Part  
      PB300  
      22  
    Quantity:  

    TDA7294 Chip for CPS106 50W Amplifier Module
    Click here for specs, downloads, and more pictures!
    Description: The heart of the CPS106 50W Amplifier Module is this monolithic integrated circuit from SGS-Thomson, TDA7294. It is intended for use as an audio class AB amplifier in hi-fi applications. It has a wide voltage range and output current capability, enabling it to supply the highest power into both 4 Ohm and 8 Ohm loads. 


    Specifications: 
    • VERY HIGH OPERATING VOLTAGE RANGE
    • (±40V)
    • DMOS POWER STAGE
    • HIGH OUTPUT POWER (UP TO 100W MUSIC POWER)
    • MUTING/STAND-BY FUNCTIONS
    • NO SWITCH ON/OFF NOISE
    • NO BOUCHEROT CELLS
    • VERY LOW DISTORTION
    • VERY LOW NOISE
    • SHORT CIRCUIT PROTECTION
    • THERMAL SHUTDOWN

    Read More
      Component or Part  
      TDA7294 Chip  
      6  
    Quantity:  

    Speaker for iPhone 4G
    Click here for specs, downloads, and more pictures!

    Speaker for iPhone 4G.

    Read More...

    Read More
      Component or Part  
      BB303  
      5  
    Quantity:  

    20mm Diameter 0.3W Full Range Mylar Speaker
    Click here for specs, downloads, and more pictures.
     (Out of Stock)Specifications:
    • External Depth: 20mm
    • External Diameter: 20mm
    • External Width: 3.1mm
    • Frequency Response Max: 7kHz
    • Frequency Response Min: 560Hz
    • Impedance: 8ohm
    • Power Rating RMS: 0.3W
    • Resonant Frequency: 560Hz
    • Transducer Function: Speaker
    • External Diameter: 20mm
    • Impedance @ 1kHz: 8ohm
    • Magnet Weight: 2.3g
    • Material: Metal
    • Operating Temperature Max: 55°C
    • Operating Temperature Min: -20°C
    • Power Max: 0.5 W
    • Sound Level Distance: 10cm
    • Sound Level SPL: 92dB
    Read More
        
      KDMG20008  
      0  
    Quantity:  

    50mm Mylar Speaker - 8 Ohm 1 Watt
    tn_BB343.png
    Read More
        
      BB343  
      50  
    Quantity:  

    DIGITAL TO ANALOG AUDIO CONVERTER
    Click here for specs, downloads, and more pictures.
    Features:
    Input:
    • digital coaxial audio: S/PDIF
    • optical audio: TOSLINK

    Output:

    • analog stereo audio: coaxial stereo

    Specifications:
    Input:

    • TOSLINK: EIAS RC - 5720B rectangular type plug
    • coaxial: RCA type connector

    Output:

    • analog stereo audio: 2 x RCA type connectors
    • audio format support: LPCM 44 kHz, 48 kHz, and 96 kHz
    • power supply: 5 VDC, 600 mA (incl.)
    • dimensions: 50 x 78 x 24 mm / 1.97" x 3.07" x 0.94"
    • weight: 45 g / 1.59 oz



    Read More
      Assembled and Tested  
      VASDAC  
      1  
    Quantity:  

    3.5MM STEREO PLUG TO 3.5MM STEREO PLUG / BASIC / 59 inch (1.5m)
    Click here for specs, downloads, and more pictures.
    Features:
    • applications:
      • device A: PC, media player
      • device B: AMP, HiFi, speaker
    Specifications:
    • quality: Basic
    • length: 1.5m
    • connectors:
      • A: 3.5mm (M)
      • B: 3.5mm (M)
    Read More
      Assembled and Tested  
      PAC206B015  
      4  
    Quantity: