blogo.jpg
  Register   Log In 
Welcome
My Account
Shopping Cart
Checkout
Contact Us
Specials
New Products
Kits and Modules
Arduino
Components
Consumer & PC
Tools and Meters
Security
App Development
How To
Kits and Modules > Audio Effects and Sound Modules >  Returning Customers
click here to log in.
Shopping Cart
Your Cart is Empty
View Cart
 
 

20 Second recording module with 9V battery Connector

Click here for BR9 Data Sheet 

Click here to learn how to Hack the Staples EASY Button!



FAQ:


Q1: How can I make this unit sound better?
A1: You can hold the speaker in your hand by making an "O" shape with your finger and thumb with the speaker held firmly inside the "O." Or you can mount the speaker in a box or to a heavier mount like a piece of plywood with a hole in it for the speaker. This decreases the speaker frame vibration and increases the speaker surface vibration which improves the sound quality.

Q2: How can I make this unit louder?
A2: You could purchase any of our amplifiers or amplifier kits to use with this unit. Type "amplifier" in the search box and click "Go."

 

br9.jpg
THIS ITEM WIL BE BACK IN STOCK AROUND THE END OF APRIL 2014

Fully Assembled and tested. All you need to do is add a 9V Battery.

Record:
Press and hold “Record” switch. LED indicator turns on and start recording. Release switch to finish recording, and LED turns off.
Play: Press “Play” switch to play complete message once.

Specifications:
  • 20 second non-volatile recordable IC.
  • Includes Electret microphone for recording.
  • 40mm Mylar speaker included.
  • Operating Voltage: 9V (battery not included)
  • Operating Current: <= 40mA (average)
  • Standby Current <= 0.2mA
  • PCB size: 1.8" x 1" (45mm x 25mm)
 (Out of Stock)
 
Quantity
Price
1 – 9$7.95
10 – 99$7.55
100 – 999$6.89
1000 +$6.59

  Assembled and Tested  
  BR9  
  0  
 
 
Tell a Friend
 
Click here for specs, downloads, and more pictures.
10 Sec Recording Module in white case with 3 section slide switch
 

Features:
  • Ideal for plush toy, or any kind of talking toys. 
  • Message retained when batteries are removed.
  • Built-in microphone and LED recording indicator.
  • Message is retained when batteries are removed.
  • 40mm (1.6") Mylar speaker
  • Sound output of more than 85dB at 10cm (3.9") distance (surrounding at 60dB).

Operation:
Record: Slide the switch to the "REC" position. Press and hold the top of the housing. While the LED recording indicator is on, speak into the built-in microphone about 8-10 cm away with a normal speaking voice. Release the top to end recording. (Recording automatically stops when memory is full.)
Play: Slide the switch to the "PLAY" position, and press the top of the housing to play.
Quantity
Price
1 – 9$3.96
10 – 99$3.76
100 – 999$3.46
1000 +$3.11

  Assembled and Tested  
  BRM06N  
  4,911  
 
..........................
Click here for detailed specs.
20 second voice recorder/playback module (A93010)
 
PLEASE NOTE: This module, part# A96010, is actually an A93010. It is virtually identical to the A96010 and it operates the same, but downloadable datasheets are available for each for comparison if necessary. The small size is because the IC is in Chip-on-board form. One button is pushed down to record the message through the on-board electret microphone; A LED turns on during this time. The other button just has to be momentarily pressed to replay the message. A second momentary press during playback will stop the playback. Sampling rate is 4K. All you have to add is the speaker (not included) and 5V DC power (not included). We also have an A96010-kit which in addition to the part# A96010 also includes a speaker and two cable connectors to connect the unit to a power supply (not included) and the speaker. The record/play time is determined by the 52K resistor. If you change it to 89K you will get 30 seconds but at a reduced sampling rate. Operating current 25mA. Standby current 10 uA. Size: 34 x 23 x 11 mm. The module comes supplied as you see it in the photo. 

OPTIONAL ITEMS (Not included):
2 x (BB089) connector cable to connect the voice recorder to a speaker and power source.
1 x (PB244) Speaker
1 x Battery holder that can hold either 4 x AAA or 4 x AA or 4 x C or 4 x D cells. See our battery holders.

(A96010 & A93010)
Quantity
Price
1 – 9$6.60
10 – 99$5.95
100 – 999$4.95
1000 +$3.95

  Assembled and Tested  
  A96010  
  101  
 
..........................
Click here for specs, downloads, and more pictures!
2" Paper Cone Midrange Tweeter 4 Ohm
 
Features:
  • The SAS Bazooka 5" shielded midbass driver features a stamped steel frame, inverted concave diaphragm, foam half roll surround, and flat spider.
  • It boasts high power handling and smooth response, thanks to an optimized ceramic ferrite magnet and copper 4-layer voice coil on an aluminum former.
  • The WF5R-MM's 2 ohm rating makes it great for mobile sound applications; also for home use when used in multiples to achieve higher system impedances.
  • Made in Brazil by Bravox. Buyout, limited quantities.
  • Read More...

Quantity
Price
1 – 9$3.85
10 – 99$3.65
100 +$3.34

  Component or Part  
  PB300  
  24  
 
..........................
Click here for specs, downloads, and more pictures!
BOSS BRS35 3-1/2" Dual Cone Replacement Speaker
 
Features:
  • 3.5" dual polypropylene cone replacement speaker.
  • Read More...
Quantity
Price
1 – 9$6.57
10 – 99$6.22
100 +$5.70

  Component or Part  
  BRS35  
  3  
 
..........................
Click here for detailed specs.
A96010 kit (A96010 with wires and speaker included)
 
PLEASE NOTE: This module, part# A96010, is actually an A93010. It is virtually identical to the A96010 and it operates the same, but downloadable datasheets are available for each for comparison if necessary. The small size is because the IC is in Chip-on-board form. One button is pushed down to record the message through the on-board electret microphone; A LED turns on during this time. The other button just has to be momentarily pressed to replay the message. A second momentary press during playback will stop the playback. Sampling rate is 4K. All you have to add is the speaker (not included) and 5V DC power (not included). We also have an A96010-kit which in addition to the part# A96010 also includes a speaker and two cable connectors to connect the unit to a power supply (not included) and the speaker. The record/play time is determined by the 52K resistor. If you change it to 89K you will get 30 seconds but at a reduced sampling rate. Operating current 25mA. Standby current 10 uA. Size: 34 x 23 x 11 mm. The module comes supplied as you see it in the photo.

This is a kit which include the following items:
1 x A96010 voice recording module (20 second message)
2 x Connector cable to connect the voice recorder to a speaker and power source.
1 x 1watt 3inch 8ohm Speaker
(you will need to connect the connector cables to the speaker and a power supply preferably by soldering)

Not included:
1 x Battery holder that can hold either 4 x AAA or 4 x AA or 4 x C or 4 x D cells. See our battery holders.
Quantity
Price
1 – 9$9.12
10 – 99$8.64
100 +$7.92

  Partially Assembled  
  A96010-kit  
  9  
 
..........................
Click here for detailed specs.
Voice Recording Module 2 x 20sec sections
 
CLOSEOUT ITEM - WHILE STOCK LASTS.

The A96020 voice recording module offers true single chip solid state storage capability and requires no software or micro-controller support. It provides high quality recording and playback with dual 20 second message. Sampling rate is 3.2K. Size: 34 x 23 x 11 mm. All you need to do is add a speaker (not included) and 5V DC Power (not included). 

Features: 
  • Non volatile flash memory technology
  • No battery back up required
  • User friendly, easy to operate
  • Slide switch for record or play back
  • Separate key to trigger message 1 or 2 
  • Low power consumption 
  • LED to indicate recording and playback
  • Built-in condenser mic 
  • Automatic power down 
  • 5-6V Operation.

OPTIONAL ITEMS (Not included):Features:
2 x (BB089) connector cable to connect the voice recorder to a speaker and power source.
1 x (PB244) Speaker
1 x Battery holder that can hold either 4 x AAA or 4 x AA or 4 x C or 4 x D cells. See our battery holders.

(A96020)
Quantity
Price
1 – 9$8.89
10 – 99$8.42
100 – 999$7.72
1000 +$4.95

  Assembled and Tested  
  A96020  
  30  
 
..........................
Click here for detailed specs.
A96020 kit (A96020 with wires and speaker included)
 
CLOSEOUT ITEM - WHILE STOCK LASTS.

The A96020 voice recording module offers true single chip solid state storage capability and requires no software or micro-controller support. It provides high quality recording and playback with dual 20 second message. Sampling rate is 3.2K. Size: 34 x 23 x 11 mm. All you need to do is add a 5V DC Power supply (not included).

Features: 
  • Non volatile flash memory technology 
  • No battery back up required 
  • User friendly, easy to operate 
  • Slide switch for record or play back 
  • Separate key to trigger message 1 or 2 
  • Low power consumption 
  • LED to indicate recording and playback 
  • Built-in condenser mic 
  • Automatic power down 
  • 5-6V Operation.
Not Included:
1 x Battery holder that can hold either 4 x AAA or 4 x AA or 4 x C or 4 x D cells. See our battery holders.
Quantity
Price
1 – 9$12.08
10 – 99$11.45
100 +$10.49

  Partially Assembled  
  A96020-kit  
  9  
 
..........................
Click here for specs, downloads, and more pictures.
Recording Module 20 second - card type
 
20 second card type recording unit. This module can be pasted (self-adhesive backing) into birthday cards, Christmas cards etc. When the card is opened your message will be played. You can record your own custom 20 second message with the built in microphone. The module is pre wired with a speaker and battery. All that is left for you to do is to record a message, past the module in your card and remove the little plastic tubing from the metal strip that protects the battery from running down when shipped from the factory.


Product Information:
Description: 20 second recording card module
Size: Length : 105mm, Width : 65mm, Height: 6.4mm (4.1"x 2.6" x 0.25")
Accessories: Battery Insulator, Battery G10 3pcs, Speaker 40mm (1.6")
Function: Record & Play back
Operation: Record : Press switch. Play back : Open the card.
Length of record: 20 seconds
RoHS compliant: YES
Quantity
Price
1 – 9$5.85
10 – 99$5.75
100 +$5.45

  Assembled and Tested  
  CT94R  
  256  
 
..........................
Click here for detailed specs.
5 minute sound recording module. 5 separate messages. speaker, microphone & switches included.  (Out of Stock)
 
THIS ITEM (BD43) NOT CURRENTLY AVAILABLE FOR SALE.
Price was: $19.94

Record and playback a total of up to 5 minutes! Up to 5 separate messages can be recorded and play back with 5 separate push switches. The 5 segments share a total of 5 minutes. Microphone, speaker and push switches included. 

Specifications:
  • PCB size: 1.9" x 1.6"
  • Wire length of push switches: approx 3.5"
  • Requires 4 x AAA batteries (not included).
Item not currently available
..........................
Click here for detailed specs.
40 second Non-volatile multi message recorder kit
 
Non-volatile multi message recorder using ISD chips. Just change one resistor for longer duration. Standalone operation using just six onboard bottons. Record via built-in microphone or external line in. Speaker and line out connector. SPI interface. SPI mode allows full control of the chip via the serial interface. This includes random access to any location inside the memory array by specifying the start and end address. SPI mode also allows access to an internal register for configuration of audio paths, inputs, outputs and mixing. 
8-24 VDC. PCB Dimensions: 2.75" x 2"
Please note: Speaker not included.
Quantity
Price
1 – 9$37.79
10 – 99$35.10
100 +$33.93

  Kit - Basic Soldering Required  
  CPS188  
  2  
 
..........................
Click here for detailed specs.
120 second Non-volatile multi message recorder kit
 
Non-volatile multi message recorder using ISD chips. Just change one resistor for longer duration. Standalone operation using just six onboard bottons. Record via built-in microphone or external line in. Speaker and line out connector. SPI interface. SPI mode allows full control of the chip via the serial interface. This includes random access to any location inside the memory array by specifying the start and end address. SPI mode also allows access to an internal register for configuration of audio paths, inputs, outputs and mixing.
8-24 VDC. PCB Dimensions: 2.75" x 2"

Please note: Speaker not included.
Quantity
Price
1 – 9$39.73
10 – 99$36.90
100 +$35.67

  Kit - Basic Soldering Required  
  CPS189  
  3  
 
..........................
Click here for specs, downloads and more pictures.
40mm (1.6in) metal housing mylar speaker 0.25W
 
40mm (1.6in) metal housing mylar speaker 0.25W


Specifications:
  • 0.25W
  • 40mm (1.57in)
  • 16 Ohm 
  • RoHS Compliant
Quantity
Price
1 – 9$1.28
10 – 99$1.08
100 – 999$0.99
1000 +$0.89

  Component or Part  
  PB240  
  448  
 
..........................
Click here for detailed specs.
Speaker Round 3 inch 8 ohm 1 watt
 
Specifications:
  • Diameter: 76mm (3 inch)
  • 1 Watt
  • 8 Ohm
Quantity
Price
1 – 9$3.99
10 – 99$3.78
100 – 999$3.47
1000 +$3.19

  Component or Part  
  PB244  
  60  
 
..........................
Click here for specs, downloads, and more pictures!
5" Indoor/Outdoor Horn
 
Features:
  • 5" Indoor/Outdoor Horn
  • This indoor outdoor horn speaker is made of high impact white ABS plastic.
  • Completely weatherproof outdoor horn speaker, ideal for indoor or outdoor use.
  • Great for small system paging speaker application.
  • Read More...
Quantity
Price
1 – 9$9.27
10 – 99$8.78
100 +$8.05

  Component or Part  
  M-50H  
  9  
 
..........................
Click here for specs, downloads, and more pictures!
Extended record / playback module (8 minutes)
 
Description:
The K8094 allows you to record and play messages of up to 8 minutes long. Recording speed is continuously adjustable so that you can choose a perfect compromise between duration and sound quality. It also allows you to generate funny sound effects. Messages are retained in memory at power loss. The unit comes complete with microphone, line level in- and output and an output for a small speaker. Applications: Play messages in musea, stores, interactive installations, scale models, toys, as doorbell, gadget, etc…

Features:

  • record duration:
    • standard quality: 8 minutes
    • High quality: 2 minutes 40s.
  • built-in microphone
  • line level in- and output
  • pushbutton control (suited for open collector control)
  • Read More...

Quantity
Price
1 – 9$34.79
10 – 99$32.33
100 +$31.25

  Kit - Basic Soldering Required  
  K8094  
  5  
 
 
Click here for specs, downloads, and more pictures.
10 Sec Recording Module in white case with 3 section slide switch
 

Features:
  • Ideal for plush toy, or any kind of talking toys. 
  • Message retained when batteries are removed.
  • Built-in microphone and LED recording indicator.
  • Message is retained when batteries are removed.
  • 40mm (1.6") Mylar speaker
  • Sound output of more than 85dB at 10cm (3.9") distance (surrounding at 60dB).

Operation:
Record: Slide the switch to the "REC" position. Press and hold the top of the housing. While the LED recording indicator is on, speak into the built-in microphone about 8-10 cm away with a normal speaking voice. Release the top to end recording. (Recording automatically stops when memory is full.)
Play: Slide the switch to the "PLAY" position, and press the top of the housing to play.
Quantity
Price
1 – 9$3.96
10 – 99$3.76
100 – 999$3.46
1000 +$3.11

 
..........................
Click here for detailed specs.
20 second voice recorder/playback module (A93010)
 
PLEASE NOTE: This module, part# A96010, is actually an A93010. It is virtually identical to the A96010 and it operates the same, but downloadable datasheets are available for each for comparison if necessary. The small size is because the IC is in Chip-on-board form. One button is pushed down to record the message through the on-board electret microphone; A LED turns on during this time. The other button just has to be momentarily pressed to replay the message. A second momentary press during playback will stop the playback. Sampling rate is 4K. All you have to add is the speaker (not included) and 5V DC power (not included). We also have an A96010-kit which in addition to the part# A96010 also includes a speaker and two cable connectors to connect the unit to a power supply (not included) and the speaker. The record/play time is determined by the 52K resistor. If you change it to 89K you will get 30 seconds but at a reduced sampling rate. Operating current 25mA. Standby current 10 uA. Size: 34 x 23 x 11 mm. The module comes supplied as you see it in the photo. 

OPTIONAL ITEMS (Not included):
2 x (BB089) connector cable to connect the voice recorder to a speaker and power source.
1 x (PB244) Speaker
1 x Battery holder that can hold either 4 x AAA or 4 x AA or 4 x C or 4 x D cells. See our battery holders.

(A96010 & A93010)
Quantity
Price
1 – 9$6.60
10 – 99$5.95
100 – 999$4.95
1000 +$3.95

 
..........................
Click here for specs, downloads, and more pictures.
Recording Module 20 second - card type
 
20 second card type recording unit. This module can be pasted (self-adhesive backing) into birthday cards, Christmas cards etc. When the card is opened your message will be played. You can record your own custom 20 second message with the built in microphone. The module is pre wired with a speaker and battery. All that is left for you to do is to record a message, past the module in your card and remove the little plastic tubing from the metal strip that protects the battery from running down when shipped from the factory.


Product Information:
Description: 20 second recording card module
Size: Length : 105mm, Width : 65mm, Height: 6.4mm (4.1"x 2.6" x 0.25")
Accessories: Battery Insulator, Battery G10 3pcs, Speaker 40mm (1.6")
Function: Record & Play back
Operation: Record : Press switch. Play back : Open the card.
Length of record: 20 seconds
RoHS compliant: YES
Quantity
Price
1 – 9$5.85
10 – 99$5.75
100 +$5.45

 
..........................
Click here for detailed specs.
Voice Recording Module 2 x 20sec sections
 
CLOSEOUT ITEM - WHILE STOCK LASTS.

The A96020 voice recording module offers true single chip solid state storage capability and requires no software or micro-controller support. It provides high quality recording and playback with dual 20 second message. Sampling rate is 3.2K. Size: 34 x 23 x 11 mm. All you need to do is add a speaker (not included) and 5V DC Power (not included). 

Features: 
  • Non volatile flash memory technology
  • No battery back up required
  • User friendly, easy to operate
  • Slide switch for record or play back
  • Separate key to trigger message 1 or 2 
  • Low power consumption 
  • LED to indicate recording and playback
  • Built-in condenser mic 
  • Automatic power down 
  • 5-6V Operation.

OPTIONAL ITEMS (Not included):Features:
2 x (BB089) connector cable to connect the voice recorder to a speaker and power source.
1 x (PB244) Speaker
1 x Battery holder that can hold either 4 x AAA or 4 x AA or 4 x C or 4 x D cells. See our battery holders.

(A96020)
Quantity
Price
1 – 9$8.89
10 – 99$8.42
100 – 999$7.72
1000 +$4.95

 
..........................
Click here for detailed specs.
5 minute sound recording module. 5 separate messages. speaker, microphone & switches included.  (Out of Stock)
 
THIS ITEM (BD43) NOT CURRENTLY AVAILABLE FOR SALE.
Price was: $19.94

Record and playback a total of up to 5 minutes! Up to 5 separate messages can be recorded and play back with 5 separate push switches. The 5 segments share a total of 5 minutes. Microphone, speaker and push switches included. 

Specifications:
  • PCB size: 1.9" x 1.6"
  • Wire length of push switches: approx 3.5"
  • Requires 4 x AAA batteries (not included).
Item not currently available
..........................
tn_bb089.jpg
2pin connector cable (8 inch)
 
2pin connector cable (8 inch)
Quantity
Price
1 – 9$0.33
10 – 99$0.29
100 +$0.24

  Component or Part  
  BB089  
  19  
 
..........................
Click here for specs, downloads, and more pictures.
KC7783 PIR Detector Module (Assem and tested)
 
This is a fully assembled and tested miniature PIR module (KC7783 with KC778B IC) with only 3 connections: Power, Ground & Output. Rated for 4 - 12VDC input power. Uses RE200B PIR sensor. Output is an active high pulse of approx. 0.5 seconds and remains active as long as there is motion. Range up to 10 feet. PCB size: 35mm x 25mm(CPS76)
Quantity
Price
1 – 9$9.45
10 – 99$7.95
100 – 999$6.95
1000 +$5.45

  Component or Part  
  CPS76  
  454  
 
..........................
tn_jb038.jpg
Battery clip for 9V PP3 Battery
 
Specifications:

I-type
low-cost
(SNAP9V)
Quantity
Price
1 – 9$0.38
10 – 99$0.32
100 +$0.29

  Component or Part  
  SNAP9V  
  83  
 
..........................
tn_bh341b.jpg
BATTERY HOLDER FOR 4 x AA-CELL (WITH SNAP TERMINALS)
 
Specifications:
with snap terminals
(BH341B)
Quantity
Price
1 – 9$0.71
10 – 99$0.59
100 +$0.53

  Component or Part  
  BH341B  
  60  
 
This web store and web site powered by NetSuite ecommerce software